Feiss VS12504 - Manual

(E) 4/07
ASSEMBLY INSTRUCTIONS FOR VS12502, VS12503, VS12504
IMPORTANT:
TURN OFF POWER AT MAIN FUSE OR
CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulb not included.
1. Before proceeding to below instructions follow
enclosed “Multiple Standard Installation
Instructions” for electrical and fixture
installation onto ceiling outlet box.
2. Install glass shade onto fitter and lock into
position by installing the spacer tube and
counter ring back onto socket. Use supplied
wrench to tighten.
3. Install light bulbs (not included). See
relamping label at socket area for type and
maximum allowed wattage.
4. Place short finial below center body and then
lock into position by screwing with tall finial
from above.
5. Install finial as shown by screwing into both
ends of tube.
Bulb
(Not Included)
Counter Ring
Spacer Tube
Socket
Shade
Fixture Plate
Tall Finial
Finial
Tube
Short Finial
Ball Cap Nuts
Fitter