Feiss VS1260_ User Manual

E) 4/07

Advertising
background image

(E) 4/07

ASSEMBLY INSTRUCTIONS FOR VS12601, VS12602, VS12603, VS12604

IMPORTANT:

TURN OFF POWER AT MAIN FUSE OR

CIRCUIT BREAKER BOX BEFORE

STARTING INSTALLATION

Carefully unpack and identify all parts

before assembly. Bulb not included.

1. Install mounting plate (see fig. 1):

A. Take supply wires from outlet box and

carefully pass them through center hole of

mounting plate. Note: the flat surface of

mounting plate must face the outlet box and the

angled rim side facing toward you.

B. Install mounting plate onto the outlet box

using two screws supplied with outlet box.

C. Spread electrical wires so that black wires

are on one side of the outlet box and the white

wires are on the other side.

2. Connect electrical wires (see fig. 1):
A. Connect fixture wires (with plastic

insulation):

Connect fixture wire without tracer (round and

smooth) to black (or red) supply wire. Con-

nect fixture wire with tracer (square and ridged)

to white supply wire. Wrap with electrical tape

to secure wire connector and wires together.

B. Connect ground wire:

Connect fixture ground wire to supply ground

wire (usually with green insulation) with wire

connector. Note: If there is no supply ground

wire at outlet box then attach fixture ground

wire securely onto green grounding screw

located at mounting plate. See fig. 2.

IMPORTANT: Never connect ground wire to

black or white supply wires.

3. Install fixture plate (see fig. 1):

While carefully tucking all electrical wires

inside of fixture plate, install the fixture plate

onto the mounting plate by fastening with a

head less screw. Use provided hex key to

tighten.

4. Install glass shade onto fitter and lock into

position by installing the spacer tube and

counter ring back onto the socket. Use

supplied wrench to tighten. Do not over

tighten.

5. Install light bulb (not included). See relamping

label at socket area for type and maximum

allowed wattage.

Bulb

(not included)

Wrench

(included)

Counter

Ring

Spacer Tube

Shade

Fixture Plate

Hex Key

Socket

Fitter

FIG. 1

FIG. 2

Fixture Wire

Fixture Ground Wire

Supply

Ground Wire

Supply

Wire

Fixture

Plate

Hex Key

Head less Screw

Mounting Plate

Outlet Box

Advertising