Feiss FM397 User Manual
Parkman 2 light flush mount, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
G
P
I
:
ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Place the fixture base and upper washer over the threaded nipple, then secure them in place by fastening the coupler.
Screw the threaded pipe to the coupler.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Place the shade and lower washer over the threaded pipe, then secure them in place by tightening the nut.
Place the decorative cup over the threaded pipe and secure it in place by tightening the finial.
1
2
1A
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
4
1
THREADED NIPPLE
1
6
5
MOUNTING PLATE
1
Parkman 2 Light Flush Mount
1.0
F 397
M
Ceiling
F 397_
M
LAMP
UPPER WASHER
COUPLER
FIXTURE BASE
5
FINIAL
SHADE
2
DECORATIVE CUP
THREADED PIPE
LOWER WASHER
NUT
3
4
6