Feiss FM399 User Manual
Payne 2 light flush mount, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
G
P
I
:
ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Place the fixture base and washer over the threaded nipple, then secure them in place by tightening the nut.
Screw the cap nut onto the threaded nipple.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Install the shade onto the fixture base and secure it in place using the thumb screws.
1
2
1A
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
4
1
THREADED NIPPLE
15
MOUNTING PLATE
1
Payne 2 Light Flush Mount
1.0
F 399
M
Ceiling
F 399_
M
LAMP
WASHER
CAP NUT
FIXTURE BASE
5
SHADE
2
NUT
3
4
THUMB SCREW
5