Feiss SF312 - Manual

1
Installation Instructions for
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory”
N R T L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Secure the mounting plate to the electrical box with two mounting plate screws.
Screw the shorter end of the threaded nipple tightly onto the coupler.
Assemble the canopy by placing the nipple cover, spacer, canopy bottom, canopy plate, canopy, and washer (in that
order), onto the threaded nipple, then secure them together using the nut.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Install and secure the strings of beads by hooking them to the top of the fixture as shown on drawing.
Hook the support chain to the bottom of the fixture and to the jewel support, then hook the string of beads to the
jewel support and hang the jewel.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Install the canopy to the mounting plate and secure it in place using the fixture screws.
1
2
1A
3
5
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
4
1
6
7
8
5
9
MOUNTING PLATE
THREADED NIPPLE
Malia 3 Light Semi-Flush Mount
1.0
SF312
Ceiling
SF312_
LAMP
WASHER
COUPLER
FIXTURE
4
8
10
SPACER
JEWEL
10
9
NUT
THREADED
NIPPLE COVER
FIXTURE SCREW
MOUNTING PLATE SCREW
CANOPY BOTTOM
CANOPY PLATE CANOPY
STRING
OF BEADS
SUPPORT
CHAIN
JEWEL SUPPORT
X3 X1 X15 Extra
A
X18
B
X18
X3 X2
A
B
A
A
A
A A
A
A
A
A
A
A
A
A A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
BOTTOM
2
3
1
6
6
6