Feiss SF311 - Manual

Installation Instructions for
Maarid 3 Light Flush Mount
1.0
SF311
CAUTION - RISK OF FIRE
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and
TURN THE POWER TO THE ELECTRICAL BOX OFF. Ceiling
SF311_
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1
2
1A
3
Secure the mounting plate to the electrical box with two mounting plate screws.
Install the lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the shade to the fixture by slipping the fixture’s threaded nipple through the shade and securing it in place using the washer, hex
nut and finial.
Screw the threaded nipple to the stem and spacer, then screw the threaded nipple to the fixture.
Install the canopy to the stem by screwing it to the threaded nipple.
Insert the cord through the stem (ensuring that the cord goes through the canopy) and trim the cord leaving enough to make
electrical connections.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly place wires into the electrical box, then place the canopy onto the ceiling and secure it with canopy screws.
1
THREADED NIPPLE
FINIAL SET
SHADE
2
3
4
STEM
4
LAMP
1
CANOPY
MOUNTING PLATE
MOUNTING
PLATE SCREW
CANOPY SCREW
BLACK WIRE WHITE WIRE
NEUTRAL WIRE HOT WIRE
5
8 9
10 10
5
6
7
8
9
10
ASSISTANCE REQUIRED
This product may require assistance from another person
for installation and safety purposes.
SPACER
WASHER
HEX NUT
FIXTURE
3