Feiss SF296 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs not included.
1. Follow enclosed supplement installation
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one.
2. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.
3. Screw the long threaded pipe into coupler
located at bottom of socket assembly.
Note correct position of threaded pipe on
illustration.
4. Place the metal ring onto the glass. Then
slip the glass through the threaded pipe
until the metal ring securely checks into
the bottom of the arms. Then secure into
position by fastening the washer and the
knurled nut onto the bottom of the
threaded pipe.
5. Slip the metal frame up until it checks
into the bottom of the metal ring. Then
lock into position using the screws.
6. Install notched cover by fastening with
finial.
4
4
5
6
1
3
2
Assembly Instructions For
SF296
(E) 6/2012