Feiss SF307 - Manual

Installation Instructions for
Cumberland 2 Light Semi-Flush Mount
1.0
SF307
Semi-Flush Mount
SF307_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1
2
1A
3
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Screw the threaded pipe to the socket assembly.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the shade by placing it into the decorative ring and over the threaded pipe. Then secure them in place with the hex
nut and washer (Do not over tighten).
Install font by fastening with finial.
1
4
THREADED PIPE
FINIAL
1
SHADE
FONT
5
4
HEX NUT & WASHER
5
2
SOCKET ASSEMBLY
LAMP
DECORATIVE RING
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.