Feiss SF256 - Manual

(E) 11/08
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulbs not included.
1. Screw the long threaded pipe into coupler located at
bottom of socket assembly. Note correct position of
threaded pipe at illustration.
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture than hire a qualified
electrician to create one.
3. Install bulb (not included). See relamping label located
at socket area for type and maximum allowed wattage.
4. A. Sit crown on top of glass shade. Then while holding
securely onto the glass shade, slide through the
installed threaded pipe until shade comes to a stop.
B. Secure into position by fastening with a flat washer
and hex nut. Do not over tighten.
C. Afterward, slip cover and install finial by screwing
onto protruding threaded pipe.
Assembly Instructions For
SF256
Bulb
(not included)
Socket Assembly
Fixture Plate
Shade
Crown
Long
Threaded Pipe
Washer
Hex Nut
Cap
Finial
3
1
2
4A
4B
4C