Feiss SF278 User Manual
Sf278, Assembly instructions for
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs
not included.
1. Install center pipe by screwing onto bottom of socket
assembly.
2. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture then hire a qualified electrician to create one.
3. Install light bulb (not included). See relamping label at socket
area for type and maximum allowed wattage.
4. A. Slip shade through center pipe until it securely checks
into bottom of crown. Secure in position by fastening with a
flat washer and hex nut. Do not over tighten.
B. Install font by fastening with finial.
C. Install hanging drop by hooking onto finial.
5. If arms become loose then use enclosed hex key to tighten
at location as shown in illustration.
Assembly Instructions For
SF278
(E) 11/09
2
5
1
4A
3
4B
4C