Feiss SF300 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs
not included.
1. Install center column on top of socket assembly.
2. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If you
do not have an outlet box at desired location to attach the
fixture then hire a qualified electrician to create one.
3. Install light bulb (not included). See relamping label at socket
area for type and maximum allowed wattage.
4. A. Place fabric shade into crown and secure with cap nut
screws.
B. Install top cover onto bottom coupler and secure with hex
nut.
C. Raise glass plate and slip through the installed threaded pipe.
Then place cover below glass plate.
D. Secure all by fastening with lock washer and finial.
IMPORTANT: DO NOT OVER TIGHTEN.
5. Hang all crystal glass parts as shown on drawing.
NOTE: To replace broken crystal, extras are included in
hardware bag.
Assembly Instructions For
SF300
(E) 4/11
4C
4B
4A
4D
1
3
5
5
2
EXTRA x 2