Feiss SF285 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs not included.
1. Follow enclosed supplement installation
instructions for electrical and fixture installation
onto house outlet box. If you do not have an
outlet box at desired location to attach the
fixture then hire a qualified electrician to create
one.
2. Install light bulb (not included). See relamping
label at socket area for type and maximum
allowed wattage.
3. A. Slip glass plate through long threaded pipe
until it securely checks into bottom of crown.
Secure in position by fastening with a flat washer
and hex nut. Do not over tighten.
B. Install font by fastening with finial.
4. Hang all crystal glass parts as shown on diagram.
NOTE: To replace broken crystal or pin, extras
are included in hardware bag. Replace by gently
bending open pin, remove broken crystal or pin,
hook new one, then close back pin. Avoid
bending pin into sharp angle.
Assembly Instructions For
SF285
(E) 12/10
1
2
3A
3B
4