Feiss SF229 - Manual

(E) 10/06
ASSEMBLY INSTRUCTIONS FOR SF229
IMPORTANT
TURN OFF POWER AT MAIN FUSE OR
CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Take fixture wire and ground wire exiting
above center column and thread through,
fixture plate, lock washer and hex nut.
Lock all together by tightening hex nut.
2. Install upper section of arms onto fixture
plate by fastening with short screws.
3. Screw threaded pipe into bottom of socket
assembly. Note correct position of
threaded pipe at illustration.
4. Follow enclosed “Multiple Standard
Installation Instructions” for electrical
and fixture installation onto ceiling
outlet box.
5. Install light bulb (not included). See
relamping label located at socket area for
type and maximum allowed wattage.
6. Place glass shade inside of cage. Then
slide the cage through the installed
threaded pipe until it stops. Secure by
fastening finial.
Center Pipe
Bulb
(not included)
Threaded Pipe
Glass Shade
Finial
Fixture Plate
Short Screws
Cage
Socket