Feiss SF221 - Manual

(E) 4/06
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulb not included.
1. Install center column by screwing securely into
fixture plate.
2. Install threaded stud by screwing into finial. Place
break on top of finial and then install them onto
bottom of glass shade by fastening with a flat
washer, lock washer, and hex nut from above.
Do not over tighten.
3. Follow enclosed supplement installation
instructions for electrical and fixture installation
onto house outlet box. If you do not have an
outlet box at desired location to attach the fixture
than hire a qualified electrician to create one.
4. Install bulbs (not included). See relamping label
located at socket area for type and maximum
allowed wattage.
5. A . Hang all arms onto hooks located at fixture plate.
B. Sit glass shade onto inside of support ring. Then
while firmly holding onto the support ring, hook
onto bottom section of each arms.
Fixture Plate
Suspension
Arm
Center Column
Glass Shade
ASSEMBLY INSTRUCTIONS FOR SF221
5
1
3
2
4
Break
Support Ring
Threaded Stud
Finial
Bulb
(not included)
Flat
Washer
Lock
Washer
Hex Nut