Feiss SF236 - Manual

(E) 4/07
ASSEMBLY INSTRUCTIONS FOR SF236
IMPORTANT:
TURN OFF THE POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION.
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Follow enclosed “Multiple Standard
Installation Instructions” for electrical and
fixture installation onto ceiling outlet box.
2. Install bulbs (not included). See relamping
label located at socket area for type and
maximum allowed wattage.
3. Slide glass shade through the threaded
pipe. Secure in position by fastening with a
washer and a hex nut. Do not over tighten.
4. Slide cap and rubber washer. Then fasten
finial onto protruding threaded pipe.
Threaded Pipe
Socket Assembly
Shade
Cap
Fixture Plate
Bulb
(not included)
Rubber Washer
Finial
Hex Nut
Flat Washer
Machine Screws
Mounting Plate
Cap Nut