Feiss SF195 - Manual

(E) REV 02/03/05
ASSEMBLY I NSTRUCTI ONS FOR SF195
IMPORTANT
TURN OFF POWER AT MAIN FUSE OR
CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Straighten arms in upright position as shown
in diagram.
2. Take fixture wires that are located above
center pipe and thread through center body.
Then fasten center pipe by screwing onto
bottom of center body.
3. Lay glass shade inside of ring. Then install
ring onto bottom section of arms by fastening
with cap screw.
4. Install light bulb (not included). See relamping
label located at socket area for type and
maximum allowed wattage.
5. Follow enclosed “Multiple Standard
Installation Instructions” for electrical and
fixture installation onto ceiling outlet box.
M U R R A Y F E I S S
©MURRAY FEI SS I MPORT LLC.
Fixture Plate
Center Body
Arm
Center Pipe
Bulb
(not included)
Glass Shade
Ring
Cap Screw