Feiss SF177 - Manual

(E) REV: 12/03
ASSEMBLY I NSTRUCTI ONS FOR SF177
M U R R A Y F E I S S
© MURRAY FEI SS I MPORT CORP.
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all
parts before assembly. Bulbs are
not included.
1. Attach arms to canopy with hex
nuts and lock washers.
2. Install bulbs (not included). See
relamping label located at socket
area for type and maximum
allowed wattage.
3. Slip rubber washer over sleeves of
ball cap nuts.
4. Position glass shade to align holes
properly with arm screws. Attach
glass to arms with ball cap nuts with
sleeves. Do Not Over Tighten.
5. Follow enclosed “Multiple
Fixture Installation Instructions”
for electrical and fixture installation
onto ceiling outlet box.
Bulb (included)
Ball Cap Nut
Socket
Small Hex Nuts
Fixture Wire
Hex Nut
Lock Washer
Mounting Plate
Machine Screws
Glass Shade
Canopy
Arms (4)
Arm Screws
Ball Cap Nuts with
Sleeves (4)
Rubber
Washer