Feiss FM212 - Manual

1
Installation Instructions for
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Place the fixture base onto the mounting plate studs and secure them in place by tightening the cap nuts.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Install the brackets on the shade so that they are aligned with the pre-drilled holes and secure them using the shade
loops.
Install the hooks onto the fixture loops, then install the hooks onto the shade loops to secure the shade.
1
2
1A
3
4
1
1
6
7
5
MOUNTING PLATE
Gramercy Park 2 Light Flush Mount
1.0
F 212 M
Ceiling
F 212_ M
LAMP
FIXTURE BASE
7
SHADE LOOP
SHADE
5
4 3
6
BRACKET
CAP NUT
MOUNTING PLATE STUD
HOOK
FIXTURE LOOP
MOUNTING
PLATE SCREW
1 1
5
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
8
8
7
8