Feiss F2049-3 - Manual

(E) 9/05
ASSEMBLY I NSTRUCTI ONS FOR F2049/3, F2050/5
M U R R A Y F E I S S
© MURRAY FEI SS I MPORT LLC.
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Socket
Bulb
(not included)
Counter Ring
Shade
Fixture Loop
Arm
Threaded Stud
Carefully unpack and identify all
parts before assembly. Bulbs are not
included.
1. Install fixture loop by screwing onto
threaded pipe which is located at top of
fixture.
2. Secure arms:
A. Temporarily remove ball cap nuts
which are located at top center body.
Set them aside.
B. Turn arms in upright position, as
shown in illustration. Then while
slightly pulling arm forward lock into
threaded studs. Make certain not to
scrape back of arms.
C. Secure arms by fastening back the
ball cap nuts.
NOTE: Extra ball cap nuts can be
found in a plastic pouch attached inside
of box.
3. Follow enclosed “Chain Suspended
Fixture Installation Instructions” for
electrical and fixture installation onto
ceiling outlet box.
4. Install shades onto fitters by fastening
counter rings onto threaded sockets.
5. Install bulbs (not included). See
relamping label located at socket area
for type and maximum allowed wattage.
Ball Cap Nut
Fitter
Top Center Body