Feiss F2397-5 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulb not
included.
1. Carefully thread fixture wire through fixture loop. Screw fixture
loop onto top threaded pipe until secure.
2. A. Spread open all arms so they are equally spaced apart to each
other.
B. Lock upper section of arms with ball cap screw onto
corresponding holes at center body.
3. Install bottom cover onto bottom of fixture by fastening with
finial.
4. Follow enclosed supplement installation instructions for electrical
and fixture installation onto house outlet box. If you do not have
an outlet box at desired location to attach the fixture than hire a
qualified electrician to create one.
5. Place Shade over threaded socket then spacer tube and secure
with counter ring, using provided wrench.
6. Install bulbs (not included). See relamping label located at socket
area for type and maximum allowed wattage.
Assembly Instructions For
F2397/5
Socket
Bulb
(not included)
Counter Ring
Arm
Shade
Fixture Loop
Ball Cap Screw
(E) 11/08
Wrench
(supplied)
Bottom
Cover
Finial
Spacer Tube
Fixture Wires
4
2
1
3
5
6