Feiss F2425-3 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs not included.
1. Install stems:
A. Choose desired installation height from dimensions shown in above diagram.
Thread fixture wires through each stems to be used. Note correct position of stems
from left diagram. Screw all stem together until secure.
B. Install bottom end of stem assembly by screwing into top of fixture.
C. Thread fixture wires through canopy, plastic ring and then swivel. Allow canopy to
carefully slide down without scraping the surface of stems. Then install swivel by
screwing onto top end of stem assembly.
2. Follow enclosed supplement installation instructions for electrical and fixture
installation onto house outlet box. If you do not have an outlet box at desired location
to attach the fixture than hire a qualified electrician to create one.
3. Install glass shade onto fitters by fastening counter ring onto threaded sockets.
4. Install bulb (not included). See relamping label located near socket area for type and
maximum allowed wattage.
Assembly Instructions For
F2425/3
Canopy
(Fixture Plate)
Fixture Wires
Shade
Counter Ring
Socket
Stem
Swivel
Bulb
(not included)
(E) 11/08
15"
21"
39"
45"
33"
27"
51"
57"
63"
69"
3
2
4
1
Plastic
Ring