Feiss F2653-3 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs not included.
1. Slip fixture loop down through the fixture wires,
and then screw on top of fixture.
2. Follow enclosed supplement installation
instructions for electrical and fixture installation
onto house outlet box. If you do not have an
outlet box at desired location to attach the
fixture then hire a qualified electrician to create
one.
3. Install light bulb (not included). See relamping
label at socket area for type and maximum
allowed wattage.
4. A. Slip shade through long threaded pipe until it
securely checks into bottom of crown. Secure in
position by fastening with a flat washer and hex
nut. Do not over tighten.
B. Install font by fastening with finial.
Assembly Instructions For
F2653/3
(E) 12/10
3
4
2
1