Feiss F1924-4 - Manual

(E) 10/04
ASSEMBLY I NSTRUCTI ONS FOR F1924/4
M U R R A Y F E I S S
© MURRAY FEI SS I MPORT LLC.
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Glass Shade
Ring
Threaded Stud
Cap Nut
Bulb
(not included)
Fixture Loop
Notched Cap
Center Body
Fixture Wire
& Ground Wire
Carefully unpack and identify all
parts before assembly. Bulbs are not
included.
1. Thread fixture wires and ground wire,
exiting above coupler, through center
pipe. Screw center pipe into coupler.
2. Thread fixture wires and ground wire,
exiting above center pipe, through
notched cap and fixture loop. Hook
arms onto notches located at center
body. Then lock arms into position by
lowering notched cap onto center body
and fastening fixture loop.
3. Fasten threaded stud securely into cap
nuts. Set them aside.
4. Lay glass shade inside of ring. Then
install ring onto bottom section of arms
by fastening with assembled threaded
stud. Make certain threaded stud and
cap nuts are securely fastened.
5. Install bulbs (not included). See
relamping label located at socket area
for type and maximum allowed wattage.
6. Follow enclosed “Chain Suspended
Fixture Installation Instructions” for
electrical and fixture installation onto
ceiling outlet box.
Coupler
Socket
Center Pipe
Arm