Feiss F1884-10 - Manual

(E) 04/04
ASSEMBLY I NSTRUCTI ONS FOR F1884/1
M U R R A Y F E I S S
©MURRAY FEI SS I MPORT CORP.
IMPORTANT
TURN OFF THE POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before beginning assembly. Bulbs are not
included.
1. Carefully thread fixture wire and ground wire
through fixture loop. Screw fixture loop onto
top threaded pipe until secure.
2. Install bulb (Not Included) into socket. See
relamping label located at socket area for type
and maximum allowed wattage.
3. Slip threaded studs of arm brackets through
holes in outside of glass. Secure with rubber
washer and knurled cap nuts.
4. Align holes in arm brackets with holes in
bottom of arms. Secure with cap nut screws.
5. Follow enclosed “Chain Suspended
Installation Instructions” for electrical and
fixture installation onto ceiling outlet box.
Glass Shade
Bulb
(not included)
Socket
Cap Nut Screws
Arm
Brackets
Arm
Top Assembly
Top Threaded Pipe
Fixture Wire
and Ground Wire
Fixture Loop
Rubber Washer
Knurled Cap Nut
Threaded Stud