Feiss F2928-2 - Manual

1
Installation Instructions for
Fording 3 and 2 Light Chandelier
1.0
F2927-3-F2928-2
Chandelier
F2927/3, F2928/2_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Assemble the outer frames and secure them together using the frame washers and screws.
Insert the thumb screw into the outer frame from the bottom and secure it in place by tightening the thumb nut onto it.
Screw the threaded pipe to the socket assembly.
Place a washer onto the socket assembly and insert the socket assembly into the shade, then place another washer onto
the socket assembly and screw the connector onto the socket assembly.
Place the fixture loop washer onto the connecter, then insert the connecter into the top of the outer frame from the inside
and screw the fixture loop onto it.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Place the diffuser onto the threaded pipe and secure it in place by tightening the finial.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
3
4
1A
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
5
6
LAMP
DIFFUSER
FINIAL
FRAME SCREW
FRAME WASHER
1
1
CONNECTOR
FIXTURE LOOP
WASHER
WASHER
WASHER
SOCKET
ASSEMBLY
THREADED PIPE
THUMB NUT
THUMB SCREW 2
FIXTURE LOOP
6
4
7
5
5
3
8
7
8
OUTER
FRAME
SHADE