Feiss F2931-6 - Manual

1
Installation Instructions for
Adams 3 and 4 Light Chandelier
1.0
P1294-F2931-6
Chandelier
P1294, F2931/6_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Screw the stem to the fixture, then screw the stem to the upper assembly.
Screw the upper nipple to the top of the upper assembly, then place the upper cup, spacer, and washer onto the threaded nipple
and secure them together by tightening with the fixture loop.
Install the candle tubes by slipping them through the sockets, then place the candle followers on top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Place the shade inside of the frame, then place the spacer and the shade nipple into the shade and secure them together by
tightening the nut.
Place the lower washer onto the bottom of the fixture and screw the lower nipple to the bottom of the fixture.
Place the lower assembly, lower cup, and lower spacer over the lower nipple and secure them in place by tightening the finial.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
LAMP
3
8
SOCKET
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE
UPPER SPACER
CANDLE TUBE
5
STEM
3
4 1
2
FRAME
LOWER CUP
UPPER ASSEMBLY
LOWER ASSEMBLY
LOWER SPACER
UPPER WASHER
FIXTURE LOOP
LOWER NIPPLE
UPPER NIPPLE
UPPER CUP
LOWER WASHER
SHADE
SHADE NIPPLE
NUT
SPACER
FINIAL
6
7
8
5
7
7
6
CANDLE FOLLOWER 3