Feiss F1889-3 - Manual

(E) 03/04
ASSEMBLY INSTRUCTIONS FOR F1889/3
M U R R A Y F E I S S
©MURRAY FEISS IMPORT CORP.
Fixture Wire &
Ground Wire
Fixture Loop
Cap Nut Screws
Bulbs
(not included)
Socket
Top Threaded Pipe
Arm
Glass Shade
Knurled Cap
Nut Screws
Knurled Cap
Nut
Rubber
Washer
IMPORTANT
TURN OFF THE POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before beginning assembly. Bulbs are not
included.
1. Carefully thread fixture wire and ground wire
through fixture loop. Screw fixture loop onto
top threaded pipe until secure.
2. Install bulbs (Not Included) into socket. See
relamping label located at socket area for type
and maximum allowed wattage.
3. Slip threaded studs of arm brackets through
holes in outside of glass. Secure with rubber
washer and knurled cap nuts.
4. Align holes in arm brackets with holes in
bottom of arms. Secure with cap nut screws.
5. Align holes in top of arms with holes in center
body. Secure with knurled cap nut screws.
6. Follow enclosed “Chain Suspended
Installation Instructions” for electrical and
fixture installation onto ceiling outlet box.
Center Body
Threaded Stud
Arm Bracket