Feiss F2045-3 - Manual

(E) 9/05
ASSEMBLY I NSTRUCTI ONS FOR F2045/3
M U R R A Y F E I S S
©MURRAY FEI SS I MPORT LLC.
IMPORTANT
TURN OFF POWER AT MAIN FUSE OR
CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Install center body by screwing into center
column.
2. Screw threaded pipe into bottom of socket
assembly. Note correct position of threaded
pipe at illustration.
3. Install arms onto center body by fastening
with ball cap nuts.
NOTE: Extra ball cap nuts can be
found in a plastic pouch attached inside
of box.
4. Follow enclosed “Chain Suspended
Fixture Installation Instructions” for
electrical and fixture installation onto
ceiling outlet box.
5. Install bulbs (not included). See relamping
label located at socket area for type and
maximum allowed wattage.
6. Slip glass shade through threaded pipe until
it rests onto bottom section of arms. Lock
them into position by fastening with washer
and hex nut. Do not over tighten.
7. Slip cap and fasten finial onto threaded pipe.
Bulb
(not included)
Socket Assembly
Long Threaded Pipe
Glass Shade
Cap
Flat Washer
Hex Nut
Finial
Center Column
Arm
Center Body
Fixture Loop