Feiss F2245-3 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulb not included.
1. Carefully thread fixture wire and ground wire through
fixture loop. Screw fixture loop onto top threaded
pipe until secure.
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture than hire a qualified
electrician to create one.
3. A. Install brackets onto glass shade by fastening with a
flat washer and cap screw.
B. Install upper section of arms onto fixture by
fastening with cap nuts.
C. Install shade onto bottom end of arms by fastening
with cap screws.
4. Install light bulbs (not included). See label located at
socket area for type and maximum allowed wattage.
Assembly Instructions For
F2245/3, F2246/3
Fixture Loop
Cap Nut
Cap Screw
Cap Screw
Bracket
Flat Washer
Fixture
Arm
Bulb (not included)
Socket
Shade
1
2
4
3b
3a
3c
(E) 10/07