Feiss F2545-3 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs
not included.
1. Slip column through fixture wires and then secure by
screwing on top of socket assembly.
2. A. Attach arms onto column by fastening with set screw.
Use enclosed hex key to tighten.
B. Install bottom of arms onto crown by fastening with
screws.
3. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture then hire a qualified electrician to create one.
4. Install long threaded pipe by screwing onto bottom of socket
assembly.
5. A. Slip shade through long threaded pipe until it securely
checks into bottom of crown. Secure in position by fastening
with a flat washer and hex nut. Do not over tighten.
B. Install font by fastening with finial.
C. Install hanging drop by hooking onto finial.
6. Install light bulb (not included). See relamping label at socket
area for type and maximum allowed wattage.
7. Install two glass plates onto top of socket assembly by placing
holes in plates through four screw studs and securing with
four ball cap nuts. Do not over tighten.
8. Install hanging drop by hooking onto upper section of arms.
Assembly Instructions For
F2545/3
(E) 11/09
7
6
5A
5B
2B
4
5C
1
8
2A
3