Feiss F2654-3 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs not included.
1. Install stems:
A. Choose desired installation height from any
combination of stems provided. NOTE: Additional
stems can be purchased to increase installation
height. Do not add more stems than will allow 6" (15
cm) of fixture wires above canopy. Thread fixture
wires through each stems to be used. Screw stems
together until secure. Screw stem assembly into top
of fixture until secure. NOTE: This fixture can be
installed without any stems for direct mount onto
canopy.
B. Screw swivel securely onto top end of stem
assembly (or top end of fixture for without stem
installation).
2. Measure 6” of wire from end of fixture plate and cut
off remaining wire. Split wires and strip off 3/4” of
insulation from each end.
3. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house
outlet box. If you do not have an outlet box at
desired location to attach the fixture then hire a
qualified electrician to create one.
4. Install shade by fastening with counter ring.
5. Install light bulb (not included). See relamping label
at socket area for type and maximum allowed
wattage.
Assembly Instructions For
F2654/3
(E) 12/10
5
4
1
2
3
2
1