Feiss F2534 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulbs not included.
1. Slip fixture loop through fixture wires, then install by
screwing on top of fixture.
2. A. Spread open all arms so they are equally spaced
apart to each other.
B. Screw bottom threaded pipe into bottom coupler.
C. Slip cover onto bottom of fixture, making certain its
notches are aligned onto arms. Then secure by
fastening with finial.
3. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture then hire a qualified
electrician to create one.
4. A. Slip candle tube over sockets.
B. Install candle follower over candle tubes.
C. Install bulb (not included). See relamping label
located near socket area for type and maximum
allowed wattage.
Assembly Instructions For
F2534/6+3
(E) 11/09
2B
1
3
2A
4C
4B
4A