Feiss F2785-3+6 - Manual

1
Installation Instructions for
Pickering Lane 9 Light Chandelier
1.0
F2785-3+6
F2785_
1A
SHADE
SHADE HOLDER
LAMP
CANDLE TUBE
Install upper ring onto fixture with ball cap screws.
Install lower ring onto fixture with ball cap screws.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install candle tube by slipping through socket.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Place and secure shade in shade holder.
1
2
3
4
5
5
6
6
2
LOWER RING
2 BALL CAP SCREW
4
UPPER RING
1
6
Chandelier
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for dry indoor locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.