Feiss F2417 User Manual
Assembly instructions for
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly.
Bulb not included.
1. Carefully slip fixture wire and ground wire through fixture
loop. Screw fixture loop onto top threaded pipe until
secure.
2. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture than hire a qualified electrician to create one.
3. Install bottom cover onto bottom of fixture by fastening
with finial.
4. Spread open all arms so they are equally spaced apart to
each other.
5. Install glass shade onto fitters by fastening counter ring.
6. Install bulbs (not included). See relamping label located near
socket area for type and maximum allowed wattage.
Assembly Instructions For
F2417/6, F2503/5
Socket
Bulb
(not included)
Counter
Ring
Arm
Shade
Fixture Loop
(E) 5/29/09
Bottom
Cover
Finial
Fixture Wires
4
2
1
3
5
6