Feiss F1887 - Manual

(E) 03/04
ASSEMBLY INSTRUCTIONS FOR F1887/4, F1888/5
M U R R A Y F E I S S
©MURRAY FEISS IMPORT CORP.
Fixture wire
and Ground Wire
Top Threaded Pipe
Fixture Loop
Bottom Arm
Bulb
(not included)
Candle Tube
Socket
Knurled
Cap Nut Screws
Cap Nut
Center Body
IMPORTANT
TURN OFF THE POWER
AT THE MAIN FUSE
OR CIRCUIT BREAKER
BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify
all parts before assembly. Bulbs
are not included.
1. Carefully thread fixture wire
and ground wire through fixture
loop. Screw fixture loop onto top
threaded pipe until secure.
2. Spread open arms evenly. Align
holes in bottom arms with holes
in center body. Secure with
knurled cap nut screws and
cap nuts.
3. Place candle tubes over
candelabra sockets and screw
bulbs (not included) into sockets
to secure. See relamping label on
candle tube for type and
maximum allowed wattage.
4. Follow enclosed “Chain
Suspended Fixture Installation
Instructions” for electrical and
fixture installation onto ceiling
outlet box.