Feiss F1840 - Manual

(E)REV: 11/03
ASSEMBLY INSTRUCTIONS FOR F1839/5, F1840/6
M U R R A Y F E I S S
©MURRAY FEISS IMPORT CORP.
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all
parts before assembly. Bulbs are
not included.
1. Spread open arms evenly.
2. Carefully thread fixture wire through
top threaded pipe. Screw top threaded
pipe securely onto top coupler making
certain no slack in wire remains in
between. Place notched cover in
between arms locking in their position.
3. Carefully thread fixture wire
through fixture loop. Screw fixture
loop onto top threaded pipe
until secure.
4. Through bottom opening of shade,
install counter ring over shade
washer onto threaded socket until
shades are secure. Through top opening
of shade, install light bulbs (Not
Included.) See relamping label at socket
area for bulb type and maximum
allowed wattage.
5. Follow enclosed “Chain Suspended
Fixture Installation Instructions”
for electrical and fixture installation
onto ceiling outlet box.
6. This fixture is supplied with 2
threaded chain links. These links are
opened and closed by twisting
cylinder on chain link. One threaded
chain link should be installed onto
the fixture loop and the other should
be installed onto the canopy loop.
The standard chain should be
installed in between these 2 threaded
chain links.
Bulb
(not included)
Shade
Fixture Wire
& Ground Wire
Fixture Loop
Washer
Notched Cover
Top Threaded Pipe
Hex Nut
Top Coupler
Counter
Ring Candle Tube
Socket
Top View of Arms in Correct Position
FIG.1
Top Assembly Parts
Arms
Fig. 2
Twist to open or close
chain link.
Threaded Chain Link
Shade Washer