Feiss F2751-6 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulb not included.
1. Install the bottom center pipe onto the
top of the socket assembly.
2. Install the shade frame onto the center
pipe.
3. Install the top center pipe onto the top of
the bottom center pipe.
4. Hang all crystal glass parts as shown on
drawing.
NOTE: Replace broken drop or pin by
gently bending open the pin, remove the
broken drop or pin, hook the new one,
then close back the pin. Avoid bending
the pin into a sharp angle.
5. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.
6. Install the shade onto the shade frame
and secure with the ball cap nuts.
7. Follow enclosed supplement installation
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one.
Assembly Instructions For
4
2
3
1
5
6
7
F2751/6
(E) 5/2012
x 4
A
A