Feiss F2907-4 User Manual
Declaration 4 light chandelier, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
Declaration 4 Light Chandelier
1.0
F2907-4
Chandelier
F2907/4_
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Screw the stem to the fixture, then screw the stem to the decorative frame.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install the candle tube by slipping it through the socket.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the shade by properly placing it over the lamp and into the shade base. Repeat steps 3-5 for remaining shades.
1
2
1A
LAMP
3
2
SHADE
SOCKET
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE
DECORATIVE FRAME
CANDLE TUBE
5
STEM
SHADE BASE
3
4
5
1
1