Feiss F2941-4 - Manual

1
Installation Instructions for
Holloway 4 Light Pendant
1.0
F2941-4
Pendant
F2941/4_
Place the shade housing over the shade assembly and screw the shade assembly to the stem assembly.
Place the socket assembly inside of the shade assembly and secure it by screwing it in.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
LAMP
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
3
4
SHADE ASSEMBLY
SOCKET ASSEMBLY
SHADE HOUSING
STEM ASSEMBLY
1
2
3
4
1