Feiss P1306 User Manual
Livingston 1 light pendant, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
Livingston 1 Light Pendant
1.0
P1284-P1306
Pendant
P1284, P1306_
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Align and insert the shade into the fixture, then rotate it clockwise to lock it in place.
Install rubber caps onto the ends of the frame and insert the ends of the frame into the fixture.
1
2
1A
LAMP
FIXTURE
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SHADE
3
4
1
2
3
4
FRAME
RUBBER CAPS