Feiss P1313 User Manual
Marquise 1 and 3 light pendant, Installation instructions for, Use minimum 90°c supply conductors
1
Installation Instructions for
Marquise 1 and 3 Light Pendant
1.0
P1312-P1313
Pendant
P1312 P1313_
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized
esting aboratory”
N
R
T
L
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Install the candle follower by placing it on top of the candle tube.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
If necessary, repeat steps 1 and 2 for remaining sockets.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FRAME
LAMP
FIXTURE
CANDLE TUBE
1
2
CANDLE FOLLOWER
4
4