Feiss P1074 - Manual

(E) 04/04
ASSEMBLY INSTRUCTIONS FOR P1074
M U R R A Y F E I S S
©MURRAY FEISS IMPORT CORP.
25"
Length
31"
Length
37"
Length
43"
Length
49"
Length
55"
Length
61"
Length
67"
Length
73"
Length
79"
Length
Mounting Plate
Mounting Screws
Fixture Wire and Ground Wire
Canopy
Ball Cap Nut
Swivel
Small Threaded Pipe
Stem (S)
(4-12" Long
1-6" Long)
Fitter
Threaded Socket
Glass Shade
Spacer Tube
Counter Ring
Wrench
Bulb
(not included)
STEM HUNG INSTALLATION:
A. Choose desired installation height from dimensions shown in above diagram.
Thread fixture wire through each stem to be used. Please note correct position of
stems from left diagram. Screw all stems together until secure.
B. Measure 6" of wire from end of canopy and cut off remaining wire. Split wires and
strip off 3/4" of insulation from each end.
1. Place Shade over threaded socket then spacer tube and secure with counter ring, using
supplied wrench.
2. Install light bulb (not included). See relamping label at socket area for type and maximum
allowed wattage.
3. Follow enclosed “Fixture Installation Instructions” for electrical and fixture installation
onto ceiling outlet box.
Carefully unpack and identify all parts before assembly.
Bulbs are not included.
IMPORTANT TURN OFF THE POWER AT
THE MAIN FUSE OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION