Feiss OL5911 - Manual

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs not included.
1. Thread fixture wires, which are located above
center pipe, through top cover. Then install
top cover by screwing onto center pipe.
Make certain to remove any slack in wires in
between parts before screwing.
2. Carefully thread fixture wires through fixture
loop. Screw fixture loop onto top threaded
pipe until secure.
3. Install long threaded pipe by screwing into
coupler located at bottom of socket
assembly. Please note correct position of
center pipe from left diagram.
4. Follow enclosed “Chain Suspended Fixture
Installation Instructions” for electrical and
fixture installation onto ceiling outlet box.
5. Slip candle cover tube onto sockets.
6. Install light bulb (not included). See
relamping label at socket area for type and
maximum allowed wattage.
7. Slide main frame through center pipe until it
checks inside of top cover. Lock them into
position by fastening with finial.
Assembly Instructions For
OL5911
(E) 12/11
1
2
3
4
5
6
7