Feiss OL8200 - Manual

2A
1
OL8200
(E) 12/11
2B
2E
2F
2C
2D
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly.
1. Follow enclosed supplement installation
instructions for electrical and fixture
installation onto house outlet box. If you do
not have an outlet box at desired location to
attach the fixture then hire a qualified
electrician to create one.
2. LED bulb and driver replacement:
A. Unscrew the 3 screws from the cap and
remove the cap and glass.
B. Unscrew the 2 screws from the LED panel
and carefully pull down the LED panel.
C. Unscrew the 3 screws for the lens and
remove the lens.
D. Unscrew the 2 screws from the LED bulb
housing and remove LED bulb.
E. Unplug the connection marked 2E and
replace with a new LED bulb.
F. Unplug the connections marked 2E & 2F
and replace with a new driver.
Assembly Instructions For