Feiss OL5702 - Manual

(E) 4/07
ASSEMBLY INSTRUCTIONS FOR OL5701, OL5702, OL5704
Bulb
(not
included)
Threaded Pipe
Door
Door Latch
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Candle
Tube
Cap Nut
Finial
Fixture Plate
Carefully unpack and identify all parts
before assembly. Bulb is not included.
1. Twist finial onto threaded pipe.
2. Lift up door latch and open door.
3. Place candle tubes over candleabra sockets
and screw bulbs (not included) into
sockets to secure. See relamping label on
candle tube for type and maximum alowed
wattage.
4. Close door shut and lock by pushing door
latch down so it locks into small cylinder
below.
5. Follow enclosed "Outdoor Fixture
Installation Instructions" for electrical and
fixture installation onto ceiling outlet box.