Breadman BREAD BAKER TR2828G - Manual (Page 8)

6.
CONTROL PANEL
NOTE: Please peel off the plastic sticker on
Control Panel before use. When using
the touchpad controls, be sure to press
the pad until you hear a beep.
A. Display Window
Shows the mode selected. Shows the menu
number(s) selected. Shows the crust color
selected. Shows minute-by-minute bread mak-
ing countdown. Shows delay baking time
selected.
B. TIMER
Use Timer to delay baking. Press and
buttons to set Timer for delayed completion.
The time will decrease or advance in 10-
minute increments. Press and hold buttons for
faster movement. Timer is not available on
some cycles; please check the Bread Baker
Cycle Times, page 21.
C. MENU
Press to select the type of bread and combina-
tion of your choice. The selected cycle auto-
matically assigns the time needed to complete
the process.
D. COLOR
Press to select the desired crust color. Choose
from Light, Medium or Dark. The Bread Baker
is preset for medium.
E. LEFT/RIGHT
Press to select which pan you would like to
use. You can choose to use the left pan only,
right pan only, or both pans.
NOTE: If you choose to use only one side,
both drive shafts will turn, but only
the side you have chosen to bake in
will heat.
F. MODE SELECT
Press to select desired bread making time
mode. The arrow will point to the selection.
When making bread, choose from the follow-
ing time modes: Basic, Rapid or Fast Bake™.
Choose Dough mode for making dough, or
Special mode for Jam, Quick Bread, Cake
and Bake.
G. START/STOP
Press to start operation or begin Timer count-
down for delayed completion. To stop opera-
tion or to cancel a Timer setting, press and
hold until you hear a beep.
NOTE: Do not press STOP when checking
the progress of bread.