Clam grill operating instructions 1 2, Normal operation, Installing release material – Garland XG36CE BE/FR MASTER SERIES GAS XPRESS GRILL User Manual
Page 12: Lighting instructions, Shut down instructions, Simplified cook cycle instructions
Part # 4517129 Rev.1 (03/10/10)
Page 12
2. Press to turn zone power on.
- - - - - - -
****
START
STOP
EMERGENCY
- - - - - - -
****
START
STOP
EMERGENCY
Press button to turn on main
power to grill.
Place item on grill surface and
select item number for that item to
be cooked.
Press both green and black buttons
to lower clam and begin cooking
product.
Press button to turn zone power on.
Clam Grill Operating Instructions
1
2
3.6 PATTY
****
START
STOP
EMERGENCY
3.6 PATTY
****
START
STOP
EMERGENCY
3
4
Press green button to cancel any
time during cook cycle.
- - - - - - -
****
START
STOP
EMERGENCY
5
NOTE: To avoid damage to controller use knuckle or flat part of finger
to press buttons. Do NOT use finger nails, tongs or spatulas
3. Load product on grill surface and select the
corresponding product key.
- - - - - - -
****
START
STOP
EMERGENCY
- - - - - - -
****
START
STOP
EMERGENCY
Press button to turn on main
power to grill.
Place item on grill surface and
select item number for that item to
be cooked.
Press both green and black buttons
to lower clam and begin cooking
product.
Press button to turn zone power on.
Clam Grill Operating Instructions
1
2
3.6 PATTY
****
START
STOP
EMERGENCY
3.6 PATTY
****
START
STOP
EMERGENCY
3
4
Press green button to cancel any
time during cook cycle.
- - - - - - -
****
START
STOP
EMERGENCY
5
NOTE: To avoid damage to controller use knuckle or flat part of finger
to press buttons. Do NOT use finger nails, tongs or spatulas
4. Press both green and black buttons to lower clam and
begin cooking product.
- - - - - - -
****
START
STOP
EMERGENCY
- - - - - - -
****
START
STOP
EMERGENCY
Press button to turn on main
power to grill.
Place item on grill surface and
select item number for that item to
be cooked.
Press both green and black buttons
to lower clam and begin cooking
product.
Press button to turn zone power on.
Clam Grill Operating Instructions
1
2
3.6 PATTY
****
START
STOP
EMERGENCY
3.6 PATTY
****
START
STOP
EMERGENCY
3
4
Press green button to cancel any
time during cook cycle.
- - - - - - -
****
START
STOP
EMERGENCY
5
NOTE: To avoid damage to controller use knuckle or flat part of finger
to press buttons. Do NOT use finger nails, tongs or spatulas
5. Press green button to cancel any time during cook cycle.
- - - - - - -
****
START
STOP
EMERGENCY
- - - - - - -
****
START
STOP
EMERGENCY
Press button to turn on main
power to grill.
Place item on grill surface and
select item number for that item to
be cooked.
Press both green and black buttons
to lower clam and begin cooking
product.
Press button to turn zone power on.
Clam Grill Operating Instructions
1
2
3.6 PATTY
****
START
STOP
EMERGENCY
3.6 PATTY
****
START
STOP
EMERGENCY
3
4
Press green button to cancel any
time during cook cycle.
- - - - - - -
****
START
STOP
EMERGENCY
5
NOTE: To avoid damage to controller use knuckle or flat part of finger
to press buttons. Do NOT use finger nails, tongs or spatulas
NORMAL OPERATION
Installing Release Material:
For installation instructions, see section on RELEASE
MATERIAL INSTALLATION on the previous page.
A release material sheet must be replaced when:
• Product sticks to release material.
• Carbon build-up ruins taste or appearance.
• Tearing occurs in the sheet’s cooking area.
• Release material coating is worn off sheet.
Lighting Instructions:
1. Ensure that the flexible gas hose is connected to the grill
and the power cord is plugged into the receptacles.
2. Turn the main power switch ON and allow the controls
to go through the power-up self-check. Once the control
panel displays the word “OFF” the unit is ready to begin
the heating process.
3. Press . The control will automatically initiate the
heating cycle. The burner will ignite and heat until the
temperature specified by the menu item has been
obtained.
If ignition of the burner does not occur on the first trial, the
bottom indicator light will flash amber. If the burner(s) do
not light within four trials for ignition, the control will display
a flashing warning, “IGNITION ERROR.” The flashing amber
light will turn to solid red and an audible alarm will sound. If
this occurs, turn the main power switch off, wait 5 minutes,
and then repeat steps 2 and 3. If after 2nd try and the control
still produces the IGNITION ERROR refer to Ignition failure in
TECHNICAL TROUBLE SHOOTING section.
Shut Down Instructions:
1. To shut down the unit at any time, switch the main power
switch to the off (non-lit) position.
2. For extended shut down periods, switch the main power
switch to the off position, disconnect the unit from the
gas supply line and unplug electrical connections.
Simplified Cook Cycle Instructions:
1. Press button to turn on mainpower to grill.
- - - - - - -
****
START
STOP
EMERGENCY
- - - - - - -
****
START
STOP
EMERGENCY
Press button to turn on main
power to grill.
Place item on grill surface and
select item number for that item to
be cooked.
Press both green and black buttons
to lower clam and begin cooking
product.
Press button to turn zone power on.
Clam Grill Operating Instructions
1
2
3.6 PATTY
****
START
STOP
EMERGENCY
3.6 PATTY
****
START
STOP
EMERGENCY
3
4
Press green button to cancel any
time during cook cycle.
- - - - - - -
****
START
STOP
EMERGENCY
5
NOTE: To avoid damage to controller use knuckle or flat part of finger
to press buttons. Do NOT use finger nails, tongs or spatulas