Garland GF SENTRY SERIES INFRA-RED SALAMANDER BROILERS - Manual (Page 10)

Part # 4526026 Rev. 03 (06/12/14) Page 10
INSTALLATION Continued
Optional Interconnect Gas Kit #4531606 - Version 2, Connecting to a 48in or 60in Range
18
17
7
3
2
4
8
11
15
6
5
16
17
4
9
10
TO INLET OF SALAMANDER/
CHEESEMELTER MANIFOLD
NOTE: CUT TUBING (ITEM 18 - 4531608) TO SIZE AS REQUIRED
TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR
MANIFOLD INLET CONNECTION
SUPPLIED WITH
RANGE
REGULATOR - 4.5"w.c.
NATURAL GAS OR 10.0"w.c.
PROPANE GAS (SUPPLIED
WITH RANGE)
REGULATOR - 6.0"w.c.
NATURAL GAS OR 10.0"w.c.
PROPANE GAS (SUPPLIED
WITH SALAMANDER/CHEESEMELTER)
MARK HOLE LOCATIONS AND MOUNT
SUPPORT BRACKET (ITEM 9 - 4531602) TO
BACK WITH (2) #10-16 TEKS SELF-DRILL/TAP
SCREWS (ITEM 14 - F67 - NOT SHOWN) PROVIDED.
ATTACH SUPPORT CLAMP (ITEM 10 - 2640800)
TO SUPPORT BRACKET (ITEM 9 - 4531602)
WITH (2) #10-24 SELF-TAPPING SCREWS (ITEM 1
F32 - NOT SHOWN) PROVIDED
SUPPLIED WITH
RANGE
4
TO INLET OF RANGE
MANIFOLD
1" NPT GAS SUPPLY
CONNECTION
12
6
13
6
17
9
10
FOR LEFT-MOUNTED SALAMANDER/CHEESEMELTER
SUBSTITUTE COMPONENTS SHOWN FOR ITEM 17 CIRCLED IN ADJACENT VIEW
TO INTER-CONNECT TUBING ( ITEM 18 - 4531608)
TO OUTLET OF SALAMANDER/
CHEESEMELTER REGULATOR
ATTACH SUPPORT CLAMP (ITEM 10 - 2640800)
TO SUPPORT BRACKET (ITEM 9 - 4531602)
WITH (2) #10-24 SELF-TAPPING SCREWS (ITEM 1
F32 - NOT SHOWN) PROVIDED
MARK HOLE LOCATIONS AND MOUNT
SUPPORT BRACKET (ITEM 9 - 4531602 ) TO RANGE
BACK WITH (2) #10-16 TEKS SELF-DRILL/TAP
SCREWS (ITEM 14 - F67 - NOT SHOWN) PROVIDED.
ITEM DESCRIPTION
QUANTITY
48” / 60”
1 Screw, #10-24 x 1/2” Pan Head, Self-Tap, Type F (not shown) 4
2
4.5” W.C 1”NPT, Regulator Natural Gas, supplied with Range 1
1” ISO 7-1, Regulator Natural Gas, supplied with Range 1
10” W.C 1”NPT, Regulator Propane Gas, supplied with Range 1
1” ISO 7-1, Regulator Propane Gas, supplied with Range 1
3
6” W.C 3/4” NPT, Regulator Natural Gas, supplied with Salamander/Cheesemelter 1
10” W.C 3/4” NPT, Regulator Propane Gas, supplied with Salamander/Cheesemelter 1
4 Nipple, 1” NPT x 2” (one supplied with range) 3
5 Nipple, 3/4” NPT x 6.5” 1
6 Elbow, 90deg, 3/4” NPT 3
7 Elbow, 90deg, 1” NPT (supplied with range) 1
8 Union, 1” NPT 1
9 Bracket, Pipe Support 48/60 2
10 Clamp, Pipe Support Bracket 2
11 Reducing Tee, 1” NPT x 1” NPT x 3/4” 1
12 Nipple, 3/4” NPT x 22.75” 1
13 Nipple, 3/4” NPT x 2” 1
14 Screw, #10-16 x 1/2” Hex, Washer Head, Teks Self-Drill/Tap (not shown) 4
15 Nipple, 3/4” NPT x 3.5” 1
16 Reducing Elbow, 90deg, 3/4” NPT x 1/2” NPT 1
17 3/4”CC x 3/4” NPT Straight Fitting 2
18 Tubing 3/4” 1