Garland HO1500 INDUCTION TEMPERATURE CONTROLLED TABLETOP HOLD-LINE - Manual (Page 18)

/Cleaning RTCSmp Tabletop Temperature Controlled Hold-Line
18 Part # 4532289 Rev 2 (1/17/14)
7 Cleaning
The cleaning of the Ceran® glass is identical to cleaning other similar
glass surfaces. You may use any regular Ceran® glass cleaning
products available from a grocery or hardware store.
CAUTION
Ensure no liquid can get into the induction unit.
Do not use hoses to clean or power wash the
induction unit or its vicinity.
IMPORTANT
• DO NOT USE: corrosive or abrasive cleaning agents, such as grill sprays, oven sprays, stain removers, rust
removers, scouring powder, and rough sponges.
• Let the Ceran glass cook-top cool down before cleaning.
• Ensure to remove all residues of cleaning agents from the glass cook-top. Use a clean moist cloth to wipe
off any such residues.
IMPORTANT Air Intake Filter
A dirty, blocked air intake filter can cause electronic damage to the induction unit. The Air Intake Filter is
inserted into the holder on the bottom of the unit. Check and clean the filter at least once a week or as often
as required. The Air Intake Filter is dishwasher-safe. Ensure the filter is DRY before putting it back into the
unit.
Glass Cleaning
1. Use razor blade scrapers or non-scratching sponges to remove all residues on the glass.
When scraping, ensure you angle your
razor blade scraper at about 20
o to 30 o
from the glass.
2. Wipe the glass clean with a damp cloth.