General Machine Products 89910 Whisper Micro Fiber Cable Blowing Machine - Manual (Page 19)

Page 19 General Machine Products Co., Inc.
The machine should be returned to the General Machine Products Co,, Inc., Trevose, Pa.
after every 1000 hours use (or at intervals of 12 months) for a major service.
As a general rule, every time an interchangeable part is removed and replaced by a part of a
different size, the part being removed should be thoroughly cleaned before being returned to
its box. Similarly the cavity from which it was removed can also be cleaned prior to the as-
sembly of the replacement part.
Air box parts: Keep clean. A build
up of moisture and dust will pre-
vent the joint faces from mating,
preventing the housing seal from
sealing. Use any traditional work-
shop cleaning agent.
Tube clamp inserts:
Keep clean. A build up of
moisture and dust, partic-
ularly in the grooves, will
reduce the clamping ef-
fect. Use any traditional
workshop cleaning agent.